Our 2025 carbon inventory shows that carbon intensity per unit of product declined for the third consecutive year (to 0.0239 metric tons of CO₂e), achieving a win-win for green productivity. While total capacity hit a record 2,619 metric tons (up 1.99%), annual emissions were strictly controlled at 62.5458 metric tons of CO₂e, remaining well below the 2023 baseline. Notably, Scope 2 indirect emissions decreased for two consecutive years due to energy-saving initiatives. As a manufacturer of water-based latexes and thickeners, we will continue driving process optimization and green formulations to build a sustainable industrial future with our partners.

Our 2025 carbon inventory shows that carbon intensity per unit of product declined for the third consecutive year (to 0.0239 metric tons of CO₂e), achieving a win-win for green productivity. While total capacity hit a record 2,619 metric tons (up 1.99%), annual emissions were strictly controlled at 62.5437 metric tons of CO₂e, remaining well below the 2023 baseline. Notably, Scope 2 indirect emissions decreased for two consecutive years due to energy-saving initiatives. As a manufacturer of water-based latexes and thickeners, we will continue driving process optimization and green formulations to build a sustainable industrial future with our partners.

2025 GHG Inventory Report: Deepening Green Resilence

Our company continues to deepen our commitment to sustainable business practices and implement scientific greenhouse gas management. According to our latest 2025 carbon footprint inventory results, while overall production capacity reached a new high driven by market demand, our carbon intensity (carbon emissions per unit of production) achieved a steady decline for the third consecutive year, demonstrating the green productivity of "growing capacity while optimizing carbon efficiency."

Historical Emission and Production Statistics

In 2025, the company's total production capacity reached 2,619 metric tons, an increase of approximately 1.99% compared to 2024 (2,568 metric tons). Despite the expanded production scale, total annual carbon emissions were successfully controlled at 62.5458 metric tons of CO₂e, representing only a marginal change from the previous year and remaining significantly below the 2023 baseline of 64 metric tons.
Concurrently, our carbon emissions intensity per unit of product decreased to 0.0239 metric tons of CO₂e (down from 0.0252 in 2023 and 0.0243 in 2024). This fully proves that our low-carbon transformation strategies in process optimization, equipment upgrading, and resource allocation are delivering tangible results.

Direct Emissions (Scope 1): Emissions stood at 21.5437 metric tons of CO₂e. As production line utilization rates increased, direct process emissions showed a normal, minor incremental growth.

Indirect Emissions (Scope 2): Emissions reached 41.0021 metric tons of CO₂e. Thanks to internal energy-saving measures and improvements in electricity efficiency, indirect emissions from purchased electricity achieved a continuous decline for two consecutive years!

Annual Production Capacity: Reached a record 2,619 metric tons, maintaining a steady and healthy growth trend.

Our Core Products and Sustainability Commitment

As a specialized manufacturer focused on water-based acrylic latexes and synthetic thickeners, we understand the critical role the chemical industry plays in supply chain decarbonization:

Green & Low-Carbon Technology: We actively develop eco-friendly water-borne technologies that utilize water as a dispersing medium to replace the organic solvents used in traditional solvent-based systems, optimizing formulations from the source to help clients significantly reduce volatile organic compound (VOC) emissions at the application stage.

Collaborative Decarbonization R&D: Leveraging our custom R&D capabilities, we integrate low-carbon footprint thinking into the product lifecycle. We work hand-in-hand with our clients to create green solutions that deliver both high performance and regulatory compliance.

A carbon inventory is not a finish line, but a metric by which we review our sustainability journey each year. Looking ahead, we will maintain transparent data management and continue to mitigate our environmental impact through process decarbonization, energy efficiency optimization, and green product innovation. Together with our supply chain partners, we aim to build a resilient and sustainable industrial future!

Download link: 2025 Greenhouse Gas Inventory Report

According to the latest completed 2024 carbon inventory results, the total annual carbon emissions amounted to 62.3 metric tons CO₂e, representing a further decrease compared with 64 metric tons of CO₂e in 2023. This year, even as production capacity increased, total carbon emissions showed a downward trend, indicating a reduction in carbon emission intensity per production unit. This reflects the company's ongoing efforts to optimize energy use and resource allocation, gradually demonstrating improvements in carbon efficiency. We will keep reducing our environmental impact to create a greener and more resilient future for the industry, our partners, and society.

2024 GHG Inventory Report: The Road to Continuous Improvement

Our company continues to put sustainability into practice through concrete actions, managing greenhouse gas emissions with a scientific approach. According to the latest completed 2024 carbon inventory results, the total annual carbon emissions amounted to 62.3 metric tons CO₂e, representing a further decrease compared with 64 metric tons of CO₂e in 2023. 

Notably, in 2024 our total production capacity reached 2,568 tons, an increase from 2,539 tons in 2023. Despite the rise in production capacity, total carbon emissions decreased, indicating a reduction in carbon emission intensity per unit of production. This demonstrates the company's ongoing efforts to optimize energy use and resource allocation, gradually achieving better carbon efficiency.

Historical emission and production statistics

Direct emission sources (Category 1): 2024 emissions were 20.76 metric tons CO₂e, a slight increase of 2.84% over 2023

Indirect emission sources (Category 2): 2024 emissions were 41.5436 metric tons CO₂e, a decrease of 5.02% compared to 2023

Production capacity: Production capacity in 2024 was 2,568 tons, an increase of 1.14% over 2023

In addition to strengthening internal practices for energy-saving and carbon reduction, our products themselves also bring sustainable value to clients and the industry:

Water-based acrylic latexes and synthetic thickeners: Centered on environmentally friendly water-based formulations, these reduce the use of solvents and volatile organic compound (VOC) emissions.

Customized R&D capabilities: We help clients develop solutions that meet environmental regulations and market demands, combining low carbon with high efficiency to enhance the product’s sustainable competitiveness.

These results are not merely numbers—they represent our continuous efforts to enhance transparent management of carbon emissions. We remain committed to advancing carbon reduction initiatives and will continue to reduce environmental impact through efficiency improvements, optimized energy use, and innovation in green products.

We believe that only by pursuing long-term decarbonization can we create a greener and more resilient future for our industry, partners, and society.

Download link: 2024 Greenhouse Gas Inventory Report

We are proud to announce that our company has successfully completed the Carbon Inventory Guidance Subsidy Project by the Industrial Development Administration, Ministry of Economic Affairs and officially obtained the 2023 Greenhouse Gas Inventory Report in compliance with the ISO-14064-1:2018 International Standard. In 2023, our total greenhouse gas emissions amounted to only approx. 64 metric tons of CO₂e, reflecting our efforts and achievements in minimizing environmental impact. Together with our partners, we aim to create a greener value chain for the industry.

We are proud to announce that our company has successfully completed the Carbon Inventory Guidance Subsidy Project by the Industrial Development Bureau, Ministry of Economic Affairs and officially obtained the 2023 Greenhouse Gas Inventory Report in compliance with the ISO-14064-1:2018 International Standard. In 2023, our total greenhouse gas emissions amounted to only approx. 64 metric tons of CO₂e, reflecting our efforts and achievements in minimizing environmental impact. Together with our partners, we aim to create a greener value chain for the industry.

2023 Greenhouse Gas Inventory Report: Advancing a Sustainable Future

We are proud to announce that our company has successfully completed the Carbon Inventory Guidance Subsidy Project by the Industrial Development Administration, Ministry of Economic Affairs and officially obtained the 2023 Greenhouse Gas Inventory Report in compliance with the ISO-14064-1:2018 International Standard. Notably, this report has passed the rigorous review by the Industrial Development Administration, demonstrating our professionalism and compliance in greenhouse gas inventory and management.

In 2023, our total greenhouse gas emissions amounted to only approx. 64 metric tons of CO₂e, reflecting our efforts and achievements in minimizing environmental impact. This data is a clear testament to our commitment to sustainability and concrete practices in environmental protection.

As a manufacturer specializing in water-based acrylic latex and synthetic thickeners, we understand the importance of innovation and environmental protection. We are dedicated not only to delivering high-quality chemical products but also to incorporating sustainable values into our operations and services. Through rigorous carbon inventory processes, we have met international standards and earned recognition from government authorities.

This report is not just a set of numbers—it’s a promise. We are committed to continuing our efforts with transparency and professionalism to reduce our carbon footprint. Together with our partners, we aim to create a greener value chain for the industry.

We sincerely invite you to join us in this mission for the planet and work together towards a sustainable future!

Download Link: 2023 Greenhouse Gas Inventory Report

CATIONIC THICKENER CT-226 is now available as a thickening agent for fabric softeners and acidic aqueous compositions. It is a liquid emulsion that is easy to handle and does not require heating or high-speed agitation to efficiently thicken the system. Feel free to request a sample or reach out for more information!

New Product Announced: CATIONIC THICKENER CT-226

ACRYLIC PRIMER AP-200 is now available as a multi-use water-based high-quality primer with good water resistance. It can also be formulated with cement and powder filling materials to form waterproofing coatings. For further information, please feel free to drop us a call or message.

New Product Announced: ACRYLIC PRIMER AP-200

Apply a thin uniform coating of AP-200 (diluted with 3X volumes of water) using either a spray or a roller brush.

Allow 30 mins for the primer to dry. AP-200 will penetrate into and fill in the pores of the substrate to further enhance its rigidity and water-proofing ability. The second layer of coating can be applied with the same dilution as needed.

Self-leveling underlayment, concrete, elastic cement, or any other construction works can then be applied on top of the primer.

Credlin won the 2018 Best Product Innovation of Chemical and Technology Industrial Elite Award in Taiwan given by the Taiwan Chemical Industry Association (TCIA).

In The News

We offer English, Mandarin, and Taiwanese Hokkien services. Should you need any further information, please do not hesitate to contact us via form below. We typically reply within a day. Thank you!

We'll never share your details. Read our Privacy Policy.

Name

No.22, Tun 6th St., Dajia Dist.
Taichung City 437, Taiwan

Contact Us

Top Taiwan manufacturer of synthetic thickeners & water-based acrylic latexes. Driven by advanced R&D, certified quality, and dedicated service. Explore our products.

Credlin Co., Ltd.

R&D and Manufacturer of Specialty Water-based Synthetic Thickeners and Acrylic Latexes

Delivering high-tech, eco-friendly, water-based specialty acrylic polymers that give our clients a competitive edge in quality and pricing, boosting their global presence and export growth.

Leveraging our core expertise in emulsion and inverse emulsion polymerization, we partner with industry leaders to develop high-value, tailored polymer solutions through dedicated R&D and manufacturing.

Driven by quality, service, and core values of integrity, we align with our clients' needs to build steady, long-term growth together.

科林實業股份有限公司

Credlin Co., Ltd.

Premium Quality Products

Professional R&D Expertise

Trust & Credibility

2025 GHG Inventory Report: Deepening Green Resilence

New Product Announced: CATIONIC THICKENER CT-226

In The News

Address

Telephone

Fax